Maritime
You Can See What’s Happening at Sea. Now You Can Control What Happens Next.
Manako for Maritime Operators
You operate in an environment where small failures escalate quickly. Weather changes without warning. Crew rotate across shifts and compartments. Deck operations move continuously. A man overboard event requires immediate response. A safety violation increases injury risk. Unauthorised access exposes critical systems. Cargo handling errors cause delay and damage. Environmental compliance breaches carry financial penalties. You already have cameras across your vessel or terminal. The problem is not visibility. It is responding fast enough, consistently enough, before safety, schedule, and cost are affected.
This Is the Pressure You’re Managing at Sea and in Port
You cannot be everywhere at once. Crew are distributed across decks and compartments. Inspections are periodic, not continuous. Response depends on who notices the issue and when. That delay increases safety exposure, increases compliance risk, and disrupts operational continuity. When cargo handling slows, schedules slip. When incidents escalate, cost increases. The longer the gap between event and response, the greater the operational and financial impact.
Turn What You See Into Operational Response
You already rely on cameras across your vessel or terminal. Today, they record incidents after they happen. Manako allows you to define what should trigger action and what should happen next. When a safety breach occurs, equipment operates unsafely, or unauthorised access is detected, the system identifies it and prompts immediate response. Instead of relying on manual monitoring or radio escalation, you act in real time and reduce risk, delay, and avoidable cost.
- No new hardware.
- No additional monitoring.
- No disruption to vessel operations.
Faster
Smarter
Faster
The Manako
Approach
Smarter
Cameras shouldn’t just record. They should respond.
Manako transforms existing camera infrastructure into a live operational system. Instead of reviewing footage after an incident, Manako:
- 1.Detects an event the moment it occurs.
- 2.Understands what it means using computer vision.
- 3.Triggers a predefined action instantly.
00:44IMPORTANT/ 100%
No Human
Monitoring Required. No Delay While Risk Builds. No Reviewing Footage After the Fact.
Analyze
Predict
Analyze
How it Works
in Practice.
Predict
Man Overboard Detection
Monitor each camera and, if an incident occurs, send the GPS location and alert the bridge immediately.
Analyze starboard-side.mp4
Thoughts 1s
- ......
- 02:34:18[Person] Overboard detected! /Sideboard side
- 02:34:18[Confidence confirmed]
- 02:34:19[Bridge] alerted! /GPS Location Marked
- 02:34:20!Crew Dispatched; Recovery Protocol
A thorough analysis of the starboard-side.mp4 video camera detected a person who had fallen overboard on the starboard side. The bridge was alerted and the GPS position was marked. The crew was dispatched and the rescue protocol was initiated in less than a second.
The System Sees, Understands, and Acts.
From detection to response in seconds. No one watching monitors. No delayed escalation. Immediate life-saving coordination.
Where Maritime Operators Use Manako.
Safety and Life Protection
- Man overboard detection.
- Slip, trip, and fall alerts.
- Fire and smoke detection.
- Confined space violation alerts..
- PPE compliance monitoring.
- Severe weather hazard detection.
Security and Access Control
- Unauthorized bridge or engine room access.
- Perimeter intrusion at port.
- Stowaway detection.
- Suspicious vessel approach alerts.
- Cargo theft prevention.
- Restricted area monitoring.
Operations and Efficiency
- Mooring line monitoring.
- Cargo loading and unloading verification.
- Equipment malfunction detection.
- Fuel transfer monitoring.
- Gangway safety monitoring.
- Crew accountability tracking.
Environmental Compliance
- Oil spill detection.
- Waste discharge monitoring.
- Ballast water management verification.
- Emission monitoring support.
- Wildlife proximity alerts.
Passenger Safety for Cruise Vessels
- Pool and deck safety monitoring.
- Medical emergency detection.
- Lost passenger identification.
- Embarkation and disembarkation flow management.
- Balcony safety monitoring.
- Restricted area access prevention.
Automous
Vision
Automous
What Changes
Day to Day
Vision
Without Manako
- Incidents are detected late.
- Crew respond after escalation.
- Compliance gaps increase exposure.
- Operational delays build incrementally.
- Safety depends on manual oversight.
With Manako
- Incidents are addressed immediately.
- Bridge teams receive real-time alerts.
- Compliance is continuously supported.
- Operations remain stable.
- Safety response is consistent across shifts.
Why Not Just Use The Existing Tools?
Making cameras see, decide, and act in the physical world is expensive and difficult without engineering teams and ongoing maintenance. Here is how common approaches compare.
- DomainPhysical WorldDigital (Text, Code)Digital (Pixels)Digital (Web, APIs)Physical World
- InputHuman ObservationText PromptsLabeled (Images)Task DescriptionsAny Camera Feed
- RequiresManual MonitoringPrompting SkillsTraining Data & CodeAPI IntegrationsNo Code. No Training.
- OutputDelayed ResponseContentA ModelA Completed TaskReal-World Action