Construction
You Can See What’s Happening on Site. Now You Can Control It.
Manako for Site Leaders
You manage a live construction site where conditions change by the hour. Multiple contractors operate at the same time. Equipment is active. Safety violations happen in seconds. Unauthorised access creates liability exposure. Equipment theft happens after hours. Material waste reduces margin. Delays build before anyone escalates them. You already have cameras across your site. The problem is not visibility. It is responding quickly enough, consistently enough, before safety, compliance, and schedule performance are affected.
This Is the Pressure You’re Managing Every Day
You cannot be everywhere at once. Supervisors move between zones. Inspections are periodic, not continuous. Response depends on who notices the issue and when. That delay increases safety risk, increases compliance exposure, and disrupts schedule performance. When work stops, costs rise. When incidents escalate, margin reduces. The longer the gap between event and response, the more it costs you.
Turn What You See Into Operational Control
You already have cameras across your site. Today, they record incidents after they happen. Manako allows you to define what should trigger action and what should happen next. When a safety violation occurs, equipment operates unsafely, or unauthorised access is detected, the system identifies it and prompts immediate response. Instead of relying on periodic inspections or manual escalation, you act in real time and reduce risk, delay, and unnecessary cost.
- No new hardware.
- No additional monitoring.
- No disruption to site operations.
Faster
Smarter
Faster
The Manako
Approach
Smarter
Cameras shouldn’t just record. They should respond.
Manako transforms existing camera infrastructure into a live operational system. Instead of reviewing footage after an incident, Manako:
- 1.Detects an event the moment it occurs.
- 2.Understands what it means using computer vision.
- 3.Triggers a predefined action instantly.
00:44IMPORTANT/ 100%
No Human
Monitoring Required. No Delay While Risk Builds. No Reviewing Footage After the Fact.
Analyze
Predict
Analyze
How it Works
in Practice.
Predict
PPE Safety Violation
Monitors each camera and, if an incident occurs, alerts a supervisor so that they can resolve the issue.
Analyze zone-3.mp4
Thoughts 1s
- ......
- 07:15:42[Worker] no hard hat detected! /Zone 3
- 07:15:42[Confidence confirmed]
- 07:15:43/Audio Warning Triggered
- 07:15:47!Situation Corrected
After a fast analysis, the zone-3.mp4 video camera shows a worker without a hard hat. The site supervisor was alerted and an audio warning was triggered. The situation was resolved in less than 6 seconds.
See. Understand. Act. In Real Time.
From detection to response in about one second. No one watching screens. No manager reviewing footage. No delay while risk builds.
Manako for Construction Environments
Safety and Compliance
- PPE violation detection.
- Fall hazard monitoring.
- Restricted area access alerts.
- Heavy equipment proximity warnings.
- Excavation and trench safety monitoring.
- Fire risk identification.
Security and Theft Prevention
- After-hours intrusion detection.
- Equipment theft alerts.
- Material shrinkage monitoring.
- Unauthorized vehicle access.
- Perimeter breach alerts.
- Vandalism detection.
Operations and Progress
- Equipment utilisation tracking.
- Material delivery verification.
- Workforce attendance monitoring.
- Milestone documentation.
- Vehicle and machinery movement tracking.
- Weather impact assessment.
Quality Control
- Defect detection.
- Rework identification.
- Concrete and framing verification.
- Inspector readiness documentation.
- Code compliance recording.
Asset Management
- Equipment location tracking.
- Maintenance need identification.
- Tool accountability.
- Material inventory monitoring.
- Waste and spillage detection.
Automous
Vision
Automous
What Changes
Day to Day
Vision
Without Manako
- Incidents are discovered after impact.
- Supervisors react after escalation.
- Safety risks increase exposure.
- Theft is identified too late.
- Schedules slip incrementally.
With Manako
- Incidents are addressed as they happen.
- Teams are supported immediately.
- Safety compliance improves.
- Theft risk reduces.
- Projects stay on track.
Why Not Just Use The Existing Tools?
Making cameras see, decide, and act in the physical world is expensive and difficult without engineering teams and ongoing maintenance. Here is how common approaches compare.
- DomainPhysical WorldDigital (Text, Code)Digital (Pixels)Digital (Web, APIs)Physical World
- InputHuman ObservationText PromptsLabeled (Images)Task DescriptionsAny Camera Feed
- RequiresManual MonitoringPrompting SkillsTraining Data & CodeAPI IntegrationsNo Code. No Training.
- OutputDelayed ResponseContentA ModelA Completed TaskReal-World Action